Qualifications:
- 1994 B.A. Chemical Engineering (Honours), University of Cambridge, United Kingdom.
- 1995 M.E. Chemical Engineering (Honours), University of Cambridge, United Kingdom.
- Corporate Member, Institute of Engineers, Malaysia.
- Professional Engineer Malaysia
- Corporate Member of the IChemE,
- Chartered Engineer
- Register TÜV Functional Safety Engineer
- Honeywell Unisim Trainer (Steady State and Dynamics)
Wata - Divemaster
To extract a summary from my CV:
- Wata has 13 years of experience in the oil and gas industry, in both design and operations.
- Wata joined ExxonMobil Exploration and Production Malaysia Inc shortly after graduation in 1995 as a process engineer in the design department.
- In 1998, he was reassigned to EMEPMI’s operations department. His responsibility was to provide technical support to an offshore production facility, eventually accepting responsibility as lead facilities engineer. His tasks were varied, included troubleshooting day to day challenges, managing retrofit projects, and leading safety cases.
- He was made the Company’s custody metering engineer in 2001, charged with leading the exercise to ensure the Company compliance with industry and company specifications was enhanced. During his tenure, a number of continuous improvements were initiated. He was involved in a number of management level committees.
- Since joining Poyry (formerly IGL) in 2003, Wata has been a Senior Process Engineer for SembCorp’s Betara project. He was on a three month secondment to Talisman Malaysia, supporting preliminary work on their Bunga Raya CO2 removal system and authored a mercury management plan. He was on a four month stint as a Senior Process Engineer at Ranhill-Worley, and subsequently provided project management support to Conocophillips Indonesia’s (COPI) Singapore Onshore Facilities. He managed the preparation of an operating manual set for Shell Sarawak and lead COPI in compiling a site training program. He has also led Exxonmobil’s effort in the upgrading the custody transfer management processes. He has HAZOP leadership experience on offshore facilities. He has recently worked on a secondment providing detailed design services to a tanker to FPSO conversion project in Singapore.
- He is currently the Managing Director of Synergy Oil & Gas Engineering Sdn. Bhd. He is currently involved in HAZOP and HAZID facilitations, and other safety studies. He has sponsored a number of design project, both steady state and dynamics.
Paypal donations to support this site are welcome.
Hello Mr Wata,
you have a very interesting site, probably we can have a commun interest, don’t hesitate to visit my website
http://www.atex-system.co.uk.
Best regards
Mr sinzot
at last, the page that not found is here..haha.
nizamer: just clearing out the comments, I had complaints the page was taking too long to reload. And this is the third iteration of this page.
Hello sir… Can i have your mobile no?
alan Lim: nope, you can call the office though.
cool. this is much faster for my quick witted abuses.
Hi Wata,
I would like to seek help from you. I have a degree in Chemical Engineering from University of Saskatchewan in Canada (2004). I have been working as a project engineer in oil and gas industry for 6 years. Recently, just completed the PSR2 Revamp project with Foster Wheeler in MRC, Sg. Udang, Melaka. Currently I am looking for a job but could not get any job since end of Feb-2010 though i have applied for many. I need some advise on what I should do in order to get a job. Can I send you my CV? Also, I have not registered with BEM since graduation. Would it be okay to seek your help to certify my certificates?
Really sorry for the trouble and hope you can help. If you are willing to help, can i have your email address
Hi Wata,
Just to add. I am willing to start from the beginning as a process engineer if given an opportunity. It might be too late but I am willing to learn new things and I dont mind to start from scratch.
Thank you
Lim
This guy seem to be willing.
If you’re willing to take a pay cut to start from bottom, its a good start.
maybe you should write to wata at his email.
i think its fpso@igl.com.my
Hi Friend,
Sorry that I do not know how to address you. Yes I am wiling to take a pay cut. I have the courage and willingness to learn.
Thanks for the email address
Thank you
Li
wow Lim…..
i am proud with you!
Hi Wata,
I have a degree in Materials engineering (metallurgy). I have been working as a corrosion engineer (specialises in CP) for 2 years now and would like to venture more in the corrosion industry of other speciality. Is there any recommendation that you could provide me? Thanks
hi wata,
has not been visited ur site for some time. and today i received your cv..its kinda funny where at norms people are rushing to send cv’s to u. and now im receiving yours. and finally we do get to meet
yeehaaa
hmmm, probably from MMC or Petrofac?
salam wata..
i always follow your update through this blog like everyday.You inspired me in such a way.
But then i can’t find your email address.
Would you let me know?
Thanks ya!
its easy dude…wata doing treasure hunt here…try Ctrl+A…n start searching again…
just a piece of fact.
wata doesn’t even let his car service center have his email, let alone some stranger on his blog.
you could try stalking him at petronas twin towers. he does go there once in a blue moon.
Wata plse send me your mobile no.
Arul: long time no hear. I’ve sent you my number to your email address. To others: I have to owe you a reaaaly big favour before I send you my mobile number at the drop of a hat.
Hi Wata!
Since you are a divemaster, do you know any business owner who is searching for interns as divemaster?
commercial diver ke? even better
Thanks!
ashraaf: we talking about O&G, or the diving industry. For commercial diving, it’s a whole other ball game. You need to attend the commercial diving schools and courses, I think most of them are in the USA.
thx for the reply!
yups, iam talking about o&g, and i mean oil and gas, not obstetricians and gynecology. If there are opportunities in commercial dives, as interns that would be very good, taking the licence is very $$$ -___-.
Other than that, divemaster is also a good opportunity for recreational dive, well just askin’ hope that would be cool if you do know anyone.
Thanks again by the way
hi Wata, i plan to share/advertise current vacancy in my Company. pls advise.TQ
Raoul: What advise would you like? Mine would be: send along a donation. 2nd: if the advert is entertaining, I may forgo the donation.
There are few positions required at our Miri office. We are the engineering design consultant. Looking for sr planning & cost engineer, mechanical/piping engineer & designer, structure engineer & instrument drafter. Minimum 6 years of related experiences. Whoever interested to apply can email me their CV.Pls email me for further discuss on this. tq
raoul: and for a few more dollars, I’ll include your email address as well.
Hi, wata. I would say it’s a in disguise to actually found your blog after browsing through lot’s of website and blog which can really give me a real insight of the OnG industry.
Will always be a follower of this blog.
lily: thank you. I hope you mean “a (blessing) in disguise”, and not other b-words.
and to describe jabba, its ba$tXXd in disguise
I’m in needs of job (engineer),urgently. Can u asst. me, Wata? Since my contract going to be ended by Dec10.
Pls sms me ur HP no, sowe could talk, more on jobs issues. TQVM
Mine..019-3401183
Azray: send a significant donation to Paypal, and I may consider helping you. If not, I’m sure Jabba will have some words of wisdom.
Hello sir,
My name is Mohd Faiz Bin Zainal, studying in Universiti Teknologi PETRONAS and im taking mechanical engineering. I’ll be going for my internship in december 2010 until july 2011. Do you know any websites or companies that are seeking for students for internship?
Hello Sir,
My Name is Zuraini Bin Selamat. Currently I am working with TMR Urusharta (M) Sdn Bhd for Facilities Management at Sarawak Shell Berhad as competent Safety Officer. Since our contract almost end by end of this year, I am seeking new job for safety section. Could you advise me?
does the Selamat in your name a coincident?
anyway, safety office is too common, unless you are a technical safety engineer.
Salam Mr. Wata,
I would like to know regarding the Graduate Member application in BEM and IEM…
1. Do we have to register with BEM before we can register with IEM? “Registration letter as a graduate engineer with the Board of Engineers, Malaysia”
2. If my degree is in Mechanical (Marine) but working in Oiln Gas (drilling), under what major should i registered? is it under mechanical, marine or petroleum?
3. I saw IEM, organizing seminar on drilling and it is arranged by Oil, Gas n mining technical division. Is BEM also have this division?
Thanks…
Tali Kapal: Wa’alaikum Salam. 1. Yes, you have to register with BEM before becoming a member of the IEM. 2. You will be registered with the BEM according to your degree, in this case Mechanical. 3. BEM doesn’t have divisions, whereas IEM being a learned institute creates divisions according to the needs and requests of members.
We are 100% Bumiputra Company, registered and licensed by PETRONAS (the National Oil Corporation) and various government agencies. We supply to the Oil and Gas and Petrochemical, Process and Power industries specializing in process, rotating, instrumentation and controls, and safety equipments.
We have more than thirty (30) years experience in the Oil & Gas production, Refineries, Petrochemicals, Process and Power industries. In addition, we have extensive understanding in the design, fabrication, construction, installation and hook-up, and start-up commissioning of our supply of process and rotating equipments, sophisticated measurement and control instrumentation, Fire & Gas detection, Safety equipment and Wellhead Control Panel.
We supply internationally renowned names such as Emerson Process Management, USA; Elliot Ebara, Japan; Proserv Group AS, Norway; General Monitors Inc., USA; Elfab Ltd, USA; BWB Controls Inc., USA; SOR (Static-O-Ring) Inc., USA; Glasgow, Scotland; Twister BV, Holland; Boustead International Heaters, UK; Ariel Inc., USA; Mobilarm Limited, Australia; Eaton Corporation, USA; Galli and Cassina S.p.A, Italy and Accelbeam Energy, Inc., USA.
We also design and manufacture Wellhead Control Panel in our fabrication yard in Johor under the Petronas Vendor Development Program. With our vast experience, technical knowledge and service/support back-up we are able to meet client demand for a fast and efficient service.
So, you want to get shafted?
You point in putting 300000 million words wasting my time here on this blog is to?
Wata,
Perhaps you might be able to help me. I was at a wedding function this past Saturday eve (30 Oct) and happened to meet Hj Mohd Fuad as we sat next to one another during the wedding dinner. My wife & I struck up a good conversation with Fuad & his wife, but we failed to exchange namecards or mobile numbers. I’d like to be able to re-connect with this new friend, so did a search to find out if there was a way to connect and your site posting about his recent training IEM-sponsored training course on Strategic Mgmt Thinking seemed to be the best bet. Any chance you could email me his contact email if you have it?
Thanks much!
Dave H
Dave H: I have forwarded you request to the committee member who invitied Dr. Fuad.
I guess many are inspire of your blog. I respect you for that. I work in SFI Sabah for 10 years and was offered a job in KPOC as mechanical engineer come this Feb2011. I am looking forward for an worthwhile adventure in O&G industries.
I read your blog regularly & found you inspire a lot people. Keep it up and hope to see you around sir.
Godfrey
COol. do contribute more.
This blogs needs more victim for abuse.
Wata,
Perhaps you might be able to help me. I was at a wedding function this past Saturday eve (30 Oct) and happened to meet Hj Mohd Fuad as we sat next to one another during the wedding dinner. I struck up a good conversation with Fuad in the toilet, but we failed to exchange namecards or mobile numbers as our hands were busy. I’d like to be able to re-connect with this new friend, so did a search to find out if there was a way to connect and your site posting about his recent training IEM-sponsored training course on Strategic Mgmt Thinking seemed to be the best bet. Any chance you could email me his contact email if you have it?
Thanks much!
Jabba H
Nice website, very informative.
Keep it up money face
Alvis: thank you. Throw money my way.
Wata,
How often Snergy conducts RAM studies? What software do they use?
mofaz: Our Jakarta counterpart does the RAMS studies. I don’t know offhand what they use.
They use blocksim 7 from reliasoft
Dear Wata,
My name is Naresh and I would like to ask regarding fresh Graduate engineer position. Do you have in mind any companies that would mind taking me in? I would be glad if you could email me personally at n_nareshnair@yahoo.com
Thanks and regards!
which discipline? mechanical? electrical? or jamban?
Personally, the only “fresh” thing is seafood.
which university? toilet uni ? university of chappaty? (note that the word chappaty is spelt with a “y” to give it a british sound, pronounced as chaar-parrt-teey)
Wata, how can we stop idiots like this Naresh from wasting our time?
Jabba: all the more fodder for you.
who is this Jabbathehutt?? so rude and arrogant….
Asri: Ah, a new reader to the blog.
Mr Jabba…
Kesian Naresh.. He just asking~~
Let’s apply ‘Golden Rule’ in our daily life..
- Do not do the things that you do not want others to do to you-
keep smiling…. (”,)
Let’s ask Aini.
From this idiot Naresh reply, do you know what type of engineer he is? what is his qualification? Which state is he in? What experience?
If not, then he is wasting our time.
By the way, pitying an idiot makes you also an idiot. They can’t do the same to me, because I don’t ask stupid question. If I look for a job, I send a proper CV.
Wata:
Hi,i am khan.I am in need to find several metering ,managers,engineers and technicians(with diploma) for Carigali Metering tender(PMO,SKO,SBO).Do you have any or know any friends that have those experience an available?
Thanks
ken: I don’t have a ready supply.
Hi Khan, mind if I submit my cv to you.
hmmm, I remember there was a flick called ” MY NAME IS KHAN”
By the way are you related to khan nia bu? he’s my neighbour. but you post show ken? are you ken or khan?
Anyway, I have many many friends that can do metering, but only have phD in metering. Can ah? who to write to? don’t even write back?
I wonder why you keep posting your comment instead of “Reply”? Your eyes still ok, dude?
Hi wata,
I am a petroleum engineering student from UTP (2nd Year) and will be taking Reservoir studies as my major electives.At the same time I also interested to take Minor in Management.
In the perspective of Oil and Gas Industry, will it make a lot of difference for a fresh graduate with or without minor in management to enter a job market since decision of taking a minor need a thorough consideration.
Hope u and jabba will give some advice and opinion.
Thanks in advance!
Lily: from my perspective, a solid technical grounding is important. The bigger players may want their staff to have management skills, but they will determine that from the interview.
you need to work for 10 yrs before being able to manage, hence the quick answer is : useless
i’d suggest you take a minor on something more useful like environment, safety, or refining etc.
Hi wata,
I am a quantity survey student from UiTM (final Year) and will be taking final project dissertation.actually, my topic is cover on the needs of quantity surveyor in oil and gas industry.from my info, we know that in oil and gas industry, quantity surveyor is the same roles with cost engineer..In the perspective of Oil and Gas Industry,do you think quantity surveyor is very important? if yes, what are the roles and their knowledge that ‘mr.QS’ should have?
Hope u will give some advice and opinion to clear it.
Thanks
Raimi: I haven’t involved myself in the purchasing of equipment or products, which is where you QS people earn your keep. Cost engineers in my experience have a wider scope, esp if they are involved in bidding for a EPCIC project. In addition to materials, cost engineers provide input into engineering costs, installation, hook-up etc.
never heard, seen or even smelt a quantity survey in oil and gas.
anyone that says the Quantity surveyor is a cost engineer is bullshit. that are the least likely to get the job, as they have no idea how to do cost and project control.
Hi Wata,
My name is Jesse & I’m currently pursuing my MSc degree in Environmental Engineering, graduating this August. I’ve a BSc degree in Environmental science & I’m very keen on pursuing a career in HSE especially in the oil & gas field.
In your opinion, is that possible because I learnt about Risk Assessment & Risk Management in my undergrad years, but I’m afraid it’s not in-depth enough in this field… Thanks!
Jesse: I’ll let someone else answer. My experience is in process safety, and I don’t know who the risk assessment companies are hiring now. I would consider RA & RM during undergrad to be sufficient to allow you to find your way around a technical Risk Assessment index, but there will be a lot of on the job training.
No problem. ideally the risk management and assessment needs to be a chemical engineering graduate, but environmental eng graduate maybe can just squeeze through.
OK, thanks a lot for your feedbacks!
Dear Wata,
We are an EPC contractor for downstream looking at penetrating the EPC downstream market in Malaysia.
We would like to explore possible synergies and opportunities with you.
If interested, please email me prviately.
Thanks!
Hi Wata,
Great blog for Oil & Gas Engineers. I am a Process Engineer with approximately 8 yrs working experience working for a engineering consultant company. I think that I am being underpaid by my current company. I would like ask you for an opinion on the market rate for a Process Engineer with such experience.
MK: Used to be that a rule of thumb was 1-1.5k per year experience. Contract is double that. After 10 years, I’m not sure. 2k+ per year of experience? Also, there is definitely a difference if you work for a PSC or with a service company.
Why not try to do PO hourly basis.
The formula also quite simple, RM10 per year, e.g. 8 years = RM 80 / hour. That will be the minimum rate. It can go higher if you have the bargaining skill
For the time being, I would not want to go on PO basis. My estimation is also about 1k per year of experience. Thank you for both your feedback.
it goes up exponentially.
being an expat outside malaysia makes it even better.
1k per year is ok up to 8 yrs. after that, negotiate. if you’re good, you get more, if not, you’re done!
If you are a process engineer, you’ll probably hear about Ms G. I would pay miss G to stay at home and not come to work…… thinking of her is as scary as getting bitten by a pontianak.
Thanks you the info.
Anyway, my company currently have a Ms G as well. If it’s the same person, I seems to agreed with about her staying at home and not coming to work.
I hope it is not GSF?
Hi, Wata.
Could I ask you a favor. Could You please share with me companies those hire graduates for junior/ trainee drilling engineer. I really wish to join the drilling industry but I have limited source prior to the companies which provide that opportunities for graduates. As far as I know, most companies prefer to hire experience personnel to fill any position. Hope you can share.
Amirul: You’ll have to find those companies yourselves. I am not privy to other companies’ HR stratergies.
Hi, Wata.
Could I ask you a favor. Could You please share with me companies those hire idiots for junior/ trainee drilling engineer. I really wish to join the drilling industry to drill hole but I have limited source prior to the companies which provide that opportunities for idiots to drill hole. As far as I know, most companies prefer to hire experience personnel to fill any position to drill hole. Hope you can share.
Shame on you Mr J! Can you find me a job too?
Hi Wata and Jabbathehutt!
I finished my internship in corrosion consultant firm and I found that the job prospect as a corrosion engineer is very good since corrosion control field is a high-demand niche market. With 5 years of experiences and some professional certificates, a corrosion engineer can get pay as high as >10K (told by O&G insiders).
But most of the corrosion service providers, they are looking for experienced corrosion engineers and for fresh graduates, they only offer so little (RM1.8k to RM2k). Any advices from seniors here about how to start a career in corrosion field ( CP, RBI, integrity ) ?
I did my research and found out a list of companies deal with corrosion:
mach3 engineering, norimax, corrtrol, best wide, intetech, ISIS, MPE, iicorr, wilson taylor. But most of them do not have any opening for fresh graduates. any advices?
Tay: And I thought RM2000 was a pretty good price for fresh meat. Of course, Jabba would have other opinions/
yes, most do not hire graduates. RM2k is ok.
I am paying my engineers RM1.2k for starters.
Good day Wata,
I’ve already graduated last year in BSc ME and i’ve decided to pursue MSc degree in Petroleum Engineering. I just want to ask your suggestion for the topic of my research. I am really interested to do research in Drilling Optimization. But i don’t know the best topic to select. Can u help me please Mr. Wata? =)
man: you got me. Drilling optimization sounds like what every O&G production company does every day, as one hole costs USD10-20M. Come to IEM drilling seminar in May / August, and ask the presenter what he things. Most of my work is above the mudline, though after … 16 years I think, you pick up things by osmosis.
thanks. Is the employment oppurtunity for Msc student is higher? What position most MSc student is hired? is it the same as graduate engineer?
man: I don’t know. I assume that all companies would pay more for a masters.
No, I won’t pay more for a master.
Imagine paying someone 2k more for his experience in “drilling optimisation using 3D technique down a borehole with a squirrel attached to the drill bore using UHU glue”. Most paper published is not pushing the limits of human knowledge.
In short, NO.
Salam,
Hi Wata,
I would like to seek help from you.I have a degree in (Mechanical-Material ) Engineering from UTM . I have been working as a Mechanical Engineer in Mechanical & Electrical (M&E) Consulting Engineering and specialise on Building services for almost 3 years. My jobs nature is doing a design (e.g HVAC system, pumps design and piping routing system ) and project implementation & execution.
Actually I’ve been looking for opportunity in oil and gas industry since my graduation day but until today, still no lucky for me to get it. Do you think my 3 years expriences work can help me to pursue my career and jump into OAG gas especially in design ? Can you help me to list down the OAG design company…
Normally, what is salary rate can I get if I join Oil and gas design company ? * my current salary rm3,000
Dear Wata,
I hope you are free enough and do not have anything to do so you can help me list down the OAG design company.
If I ask very nicely, can you also help me list down the telephone number of all McDonalds fast food in Kedah?
Please list them in alphabetical order. By the way, coffee, black, no sugar….pleeeease…
Idiot
1. aku tak faham kenapa kena ada jabbathehutt
2. aku tak faham kenapa dia kena mention mcD Kedah?
p/s : just kidding. love mr.j. can we meet up somewhere in KL?
ah, ada jabba, baru tekanan darah wata boleh cukup high untuk peredaran darah yang bagus.
jabba sekarang di Singapore, on the way to indonesia. tapi tak boleh jumpa sebarangan. sudah ada pembunuh upahan yang memburu saya,
Dude,
I saw an article about Taufik Mokhtar, any chance I may have his contact number or email, was good friends during our A Level and undergrads.
cheers
Hisham Abdul Rahman: send your contact details to hookmeup@igl.com.my, an introduction about yourself so En M. Taufik can remember you, If he agrees I’ll forward him your contact details. If he doesn’t, not my fault.
Salam Bro
since u’\ve been promoting vacancies in 0&g industries, I would like to ask for ur kind help if u could provide me contacts to apply for job with Global Offshore (Malaysia), if you have any… especially the email. I’ve tried sending thru snail mail and yet to receive any response. Appreciate if u have and could share the contact here. TQ very much bro~
Amin: Wa’alaikum salam. I don’t know who Global Offshore are (someone educate me), apart from what’s in the papers. Why don’t you go and visit their offices? Usually, if a company doesn’t respond to your mail, it means they aren’t interested. That’s how I would react.
Salam Mr Wata,
Im Helmi, a fresh graduate, pursuing in Mechanical Eng. Im just finish my intern at PCSB Kerteh and interested to join O & G Industry. By now, i’m still seeking for a post of Engineering Trainee in O & G. But i have to realize that, it is difficult to get due to high volume of demands + (cable, broadband).. u know what i mean rite??..there is any that u want to suggest..Plz.. assist me sir…
Hi Wata, I’m not gonna donate paypal currency as I don’t find your site – with all the engineering crap in it – exciting. But since I have known you from the coverted-BTU5 program days in the 90′s, let’s catch up. You would know where I am now from the email address.
Sam: If it gets you riled enough to contact me, then that’s sufficient. How’s life?
Wah, SAM IMPERIAL COLLEGE LONDON,
your title is longer than my piece of crap (I got constipation, so it is just the length of IMPERIAL COLLEGE.
Don’t really need to donate, cuz the engineering crap is shorter than imperial college crap.
Salam Mr. Wata,
Is it possible for me to get a job in well or drilling services company if
i only have experience in contractor company only.
Dear Mr.Wata,
I got an interview with RWP kuantan..But will there be much different in terms of technical exposure between RWP kuantan, RWP KL and RWP Kerteh?I heard RWP KL doing greenfield projects..RWP Kerteh offshore + downstream..Not sure about RWP Kuantan..I’m currently a process engr with just 2 years experience in O&G..
Bete: I don’t know what RWP Kuantan does. I suppose they will support the Gebeng plants, i.e. petrochemicals. Also, any O&G projects that require more resources will probably be pulled from Kuantan.
Where is the office?
Dear mr wata,
i just finished with my mechanical degree in UTP. im taking petroleum as my major. Now, i looking for job in oil and gas industry as graduate engineer. Is there any job opportunities that you can recommend to me?
Dear Mr. Wata,
I am a petroleum engineering graduate 2010. I am unusure about my future or path where i am heading. Currently i am working as project engineer in a design engineering consultant company. But what iive studied during my petroleum course differs from what i am working now. Sometimes i feel like i want to be in a discipline or more specific technical jobs rather than contolling and coordinate projects. FYI, i just started work for 1 year. I would like to seek your advise and recommendation on my unusure future. Appreciate if you can reply to my email. Thank you.
Dear Mr. Wata,
Having this page has source of knowledge to view the oil and gas trend is a bless. Even better as if my team and I share your experience and opinion regarding our recent and future research in Microbial enhanced oil recovery particularly in plugging method.
I’m Fareh, an applied microbiologist student. Our team members have their own expertise. An enhanced and improved oil recovery Prof, mathematician (statistical) and experienced applied microbiologist in waste water, biofuel and updated bioscience application.
It’s such an great opportunity to have a network with you, Mr. Wata. My email is . Thank you Sir.
Dear Wata,
Good day to you & hope this e-mail finds you well.
I’m the professional marketer of Fleming Gulf Conferences, we are an European based MNC within business intelligence sector. We organise a variety of top class conferences of respective industries, with the target audience who are the C-level executives from public listed companies around the world.
I have come across your personal blogger website: http://polaris.canang.com/ which is related to Oil & Gas sector. Hence, I’m writing to make a proposal for cooperating with you on our Oil & Gas conferences.
Kyle Law: You have the wrong blog. And Polaris has nothing to do with O&G. Also, it posted one blog entry in 2 years.
budak ini lantak aja…..
dia akan ganti blog web address and kirim ke jutaan orang
mana tau ade orang bodoh kena tipu….
ini pasti telemarketeer yang dapat commission…. apalagi sekarang mau cooperate dalam oil and gas conference…..
Hey idiot JabbatheHutt,
How much did you earned for a month that you told you previously? But I can tell you that now my pay is a lot more than you fucking idiot. Even PM also lower than mine. You fuck-off idiot….
that’s what all the con man says.
If someone has such a high salary, and can’t get the blog address right, something is fishy.
Somemore, keep on changing log-in. This is like a pimp changing hand phone weekly. kyle Law = NCHSLR ? I bet in reality he is a 45yr old fat bastard in Nigeria trying to scheme something….. we call that 419….
yeah… yeah…. you earn more than the prime minister, that’s what they all say…..
I called Fleming Gulf Conferences, and they don’t know you. You’re an independent ciplak agent? If anyone don’t believe, just call Fleming Gulf Conferences, and they will tell you no such person…
You think you are genius? You’re really stupid somemore idiot… I’m not whatever law as you mentioned. Who else in this world salary less than PM? Even CEO petronas salary higher than PM. Are you idiot? I’m pity of you bcos you know nothing. You think only oil industry pay the highest?
Idiot, you haven’t step into other world that’s why you are brainless.
Idiot…
Just wondering if that’s your dad’s website. Idiot…. hahahaha idiot… idiot….
NCHSLRS: No, this is not Jabba’s dad’s website. Play reasonably nice, no foul language, and we’ll let you antagonize Jabba a bit more.
The only word that I can describe him is IDIOT…. IDIOT is not a foul language… That’s a very good manner to idiot people like him. That word suit him. This is the fact that he’s idiot. If for others, then idiot is a foul language but for him, this do match him. Another word also suit him “FUCK-OFF”…. This word suit to a person just like him. Again, this is not a foul language if applied to a person like him. Wata, that’s true…
NCHSLRS,
Your vocabulary is limited to idiot. Normally, that’s quite lacking in people of your caliber. Most people have salary less that the PM.
Anyway, if you can only shout idiot, there’s very limited things you can do with your money. You have my condolence.
PS. yes, I am a idiot, but with a little post, you already mengamuk…. imagine a man and a monkey in the cage. I tease, you jump….. hahahaha… I’m the idiotic man, your the naked monkey…. hahahhahaaaa
Good one Jabba! LOL *clap clap*
Idiots will always define others as idiot. I’m eager to see more coming from NCHSLRS.
Me too. A bit bored these days.
I actually like to see how you reply without using the word idiot…..
anyway, if I tease this guy enough, he may get a stroke or his head will explode……. its been a long time i had that much fun winding someone up.
Assalam Mr Wata,
Do you still remember me? I’m Yusmahwati Yusof, your trainee in IGL Oil and Gas Consultant few years ago. May i get you contact number please? I’m searching for references for my cv.
Thanks.
Boss, just been to the BEM website. Looking at the photos for all the PEng….. our picture looks shit. But it is interesting that the listing for chemicals are very very limited, and we know most of the guys.
Jabba: If you want a new picture to be put in, let me know. I’m heading to that building this Friday.
Mr. Wata, could you advertise this?
Looking for LEAD MARINE ENGINEER
Scope of Responsibilities
Lead hull and marine system engineering execution and design integrity implementation for offshore field development of FPSO.
Lead hull and marine system engineering during the detail design and conversion of a trading tanker into an FPSO.
Monitor and expedite contractors’ performance during detail engineering, fabrication, commissioning and installation.
Provide technical engineering support and expertise to project delivery team as required.
Review technical compliance of contractor’s deliverables against design intent, safety and operability.
Review contractors’ hull and marine system design documents prepared for the conversion.
Manage interfaces between hull and marine systems and topsides systems.
Skills & Qualifications
• Class 1 Certificate of Competency as a Marine Engineer and a Degree in Marine Engineering, Mechanical Engineering or Naval Architecture.
• Professional Engineer recognized by an International Body.
• Have at least 10 years experience in marine engineering design new construction or conversion of which 5 years will have involved FPSO’s/FSO’s.
• Familiar with Classification Rules and Regulations for FPSO’s/FSO’s.
• Familiar with the design and functionality of marine systems applicable to FPSO’s/FSO’s.
• Competent in solving design issues and team player with good communication skills.
please email your CV to petrohorizon@gmail.com
Shafeq: we expect a substantial donation to our blog.
Give it to synergy. We can do marine engineering, but we won’t give you the lead.
Hello, I have just joined engineering career in process deparment. Could you advise me which books I shuold read for my job? Thanks in advanced!
Quang: first, you still have your textbooks and notes? Those are very useful. Second, look at the books I have recommended. I suggest you get access to Perry’s, GSA, Crane and Maurice Stewart’s series. Other than that, your reading material should be related to your work. API RPs, client design standards should be in your toolbox as well.
GPSA, API and DEP/PTS as part of your work.
Hello guys
What’s like to be in Mongolia exploration activity? Any restriction?
Wata,
looking for info on current gas prices…..any info eg. what Price Petronas pays to suppliers…………..? Your web came in search but 2008 data….wondering if you have latest info.
Sredharan,
If one knows what PEtronas pays, then I might as well be Petronas. If you are a researcher asking these type of question on a public blog, then you are classified as an idiot.
I should say WHOW!!!….you’re highly qualified, and you’re sharing your experiences with the readers here, furthermore you’re running this site merely on donations?…..salute!
eric cheah: thank you for your comments. What I mainly run this site on is sheer bloody mindedness. Need more donations…